Configuring RADIUS based MAC Filtering on SD 5.x and Below.
This article applies to all controller running SD version 5.x or below.
KB ARTICLE TYPE: Configuration
RELATED PRODUCTS: controller
RELATED SOFTWARE VERSIONS: 5.x and below.
KEYWORDS: Radius, MAC filtering, controller
CONFIGURATION STEPS:
GUI Steps:
Please define a Radius server in the controller GUI > Configuration > Radius > Fill the details and create a Radius server entry.
Navigate to Configuration > MAC Filtering > ACL Environment State > Map the ACL to the radius server entry which was created just now. Please select the name of the Radius server from the “Radius Profile Name”.
Click on the Save button to save the running configuration to the start-up configuration.
CLI Steps :
STEP
1 : The following commands set up a profile for the primary RADIUS
server, main-auth, that specify the server’s IP address and secret key.
All other default parameters (such as the port number (1812)) are
acceptable, and not changed:
meru# configure terminal
meru(config)# radius-profile main-auth
meru(config-radius)# ip-address 10.10.158.104
meru(config-radius)# key secure-secret
meru(config-radius)# end
meru#
STEP 2 : The following command configures and enables the primary RADIUS server named in the profile main-auth:
meru(config)# access-list radius-profile primary main-auth
meru(config)# exit
meru#
The Fortinet Security Fabric brings together the concepts of convergence and consolidation to provide comprehensive cybersecurity protection for all users, devices, and applications and across all network edges.
Copyright 2024 Fortinet, Inc. All Rights Reserved.