Support Forum
The Forums are a place to find answers on a range of Fortinet products from peers and product experts.
clwolf
New Contributor

wifi bridge slow

Hi. I have a 90D and 2 x 221C WAPs. I put this in " local bridge" so that the wired and wireless could be on the same subnet. Ever since I did this the wireless to a certain IP (outside) is slow. Wired is not slow at all. All UTM is disabled currently. Very few policy rules...and no traffic shaping. Any ideas? I should say the certain IP is going through a direct route via static route to another router in the building. Thanks.
5 REPLIES 5
Uwe_Sommerfeld
New Contributor

Hi clwolf, what is meant by slow... what is the overall speed - to wired clients connected to the fortigate from the FGT wifi - the speed to other routed targets, e. g. default routed traffic. is there a significant difference?
AndreaSoliva
Contributor III

Hi what version your are using? Update to at least last 5.2.1 FAP version b0216. In the release notes are mentioned some bridge stuff. Because I do not know what you are using on FGT please look that the version on the FGT is working with the FAP version. If you are using new release 5.2.x on FGT upgrade to 5.2.1! hope this helps have fun Andrea
Nihas
New Contributor

I am also having performance issues with FAP, but not to a particular IP(s). When I check the ping to gateway, it' s more than 2000ms and lot of time out also there. I am using 5.2.1 in both Controller &FAP221B.
Nihas [\b]
Nihas [\b]
yzhang_FTNT
Staff
Staff

could you telnet to the ap and post the dmesg output when the ping is slow? It can log ping request/ reply with timestamp, and give some hints on issues. You maybe need to enable telnet login for this FOrtiAP on the controller side' s WTP config. The slow issues reported in here are all related to local bridge mode SSID?
Fatih
New Contributor

need to examine the configuration. Please give the following command set ip-fragment-preventing icmp-unreachable tcp-mss-adjust
FCNSA / FCNSP
FCNSA / FCNSP
Announcements

Select Forum Responses to become Knowledge Articles!

Select the “Nominate to Knowledge Base” button to recommend a forum post to become a knowledge article.

Labels
Top Kudoed Authors