what function of ospf interface

[jony]

OSPF over ipsec vpn is finished. what function of ospf interface ? config router ospf config area edit 0.0.0.0 next end config neighbor edit 1 set ip 100.0.130.2 next end config network edit 1 set prefix 100.0.130.0 255.255.255.0 next end config ospf-interface edit " 1" set cost 10 set interface " to-fw2" set network-type point-to-point next end config redistribute " connected" set status enable end config redistribute " static" end config redistribute " rip" end config redistribute " bgp" end config redistribute " isis" end set router-id 1.1.1.1 end

[Istvan_Takacs_FTNT]

For per-interface OSPF configuration. Not a unique Fortigate feature, it' s an OSPF configuration option that you can find in other vendor' s products, too.

[jony]

Thank you In fact,at first, I didn' t configure ospf interface, the ospf network remain is full. Because the network type is point to point ，so the ospf interface is unnecessary. If only the routing is announced.