web filter in PBR

[vishal]

Hi all, 

Is it possible to achieve website control in Policy based Routing using internet service . . Below im attaching image of PBR configuration page

My fortigate device version 7.0.2

Pls advise

[jintrah_FTNT]

Hi Vishal,

The internet service database contains a list of services and may not be just http/https. Could you please elaborate what webfiltering actions you are trying to achieve using pbr?

Best regards,

Jin

[seshuganesh]

As per the screenshot in the destination you should not give 0.0.0.0/0 you should give only that specific ISDB, also here you are stopping the traffic from forwarding through policy routing. It means that specific traffic matches this rule will not forward through policy routing it will take any other route.

It wont block the traffic.

Please elaborate the issue more clearly to achieve your requirement.

[vishal]

Hi @Seshu 

Hi @jintrah_FTNT 

Basically i want to use web filter profile like the way we use in IPV4 Policy. is it achievble through PBR ? that stopping forwarding configuration in PIC you can ignore.

[vishal]

Hi @jintrah_FTNT 

Basically i want to use web filter profile like the way we use in IPV4 Policy. is it achievble through PBR ?

[sjoshi · Accepted solution]

Hi Vishal,

You wont be able to use webfilter profile in Policy route

Policy route is used for routing and all the required security profile should be implemented in firewall policy

If you want to allow specific URL from specific outgoing interface then you can create FQDN and select it as destination in PBR

[vishal]

Thank you @sjoshi