wan missed from source address on forigate 80d

[yaronbeny7]

hello,

i want to create rules to allow port3 to access wan 

but i see wan is missing.

please help

[ede_pfau]

I don't quite understand - you can select all address objects that are either bound to port3 or to "any". Which specifc address are you looking for?

I guess that for the destination interface you mean to select "wan", and destination address would be "0.0.0.0/0" = "all".

Is that right?

[yaronbeny7]

i need configure port 3 access to internet

[ede_pfau]

Create a policy with

source interface: internal

source address: <your WiFi subnet>   *create address object first

destination interface: port3

destination address: ALL

service: ANY

NAT: enable (!)

UTM: your choice - at least AV

That should be all.

[yaronbeny7]

i'm not sure how to do "create address object first "

[ede_pfau]

Firewall > Address Objects > create new

Have you ever had a look into the docs - Handbook, Cookbook? I mean, just the basics.

[yaronbeny7]

Hello

Please See Scrintshoot From

The Firewall and tell me if its OK.

[ede_pfau]

Looks OK.

Make sure you have NAT enabled.

And add an AV profile (for instance, "default") to protect your network from viruses, trojans etc.

[yaronbeny7]

it still not working.

i can't surf to the internet from this port3.

can i you remote my pc please ?