wakeonlan fortiswitch 448E over vlan

[ipranger]

Hello all, 

I'am using here fortiswitch 448E. I also have Fortiap's running here. So the goal is that a magic package can send to an other vlan to wakeup some clients. So far I have not found anything that solves this. 

On my old HP switch I had to set these options:

ip directed-broadcast
ip forward-protocol udp 10.10.3.255 65535

Are there similar options for the Fortiswitch?

[M_M_SW]

Have you tried to use allowVLAN on the Fortiswitch 448E ?

[ipranger]

M.M.SW wrote:

Have you tried to use allowVLAN on the Fortiswitch 448E ?

Hello @M.M.SW and thank you for your answer. What do you exactly  mean with that? If you mean, that i have acl's? No there aren't acl's on the switch. Everything is allowed. I also have advanced license activated. 

[M_M_SW · Accepted solution]

Please see the following example :  

config switch-controller managed-switch edit S424ENTFxxxxxxxx   config ports     edit "port1"       set vlan "vsw.FortiLink"       set allowed-vlans "WoL_Vlan"       set untagged-vlans "qtn.FortiLink"       set export-to "root"     end

    Where allowed-vlans allows your wakeonlan vlan to pass      

[ipranger]

Forgot to mention. I run the switch in standalone mode.

[ipranger]

OMG, so easy, it works now with that allowed-vlans.

Very Thanks :)