Support Forum
The Forums are a place to find answers on a range of Fortinet products from peers and product experts.
ahmetyilmaz2050
New Contributor II

vxlan for vlan1

Hi,

 

We created the vxlan according to the document below. We can carry vlan50 or etc. but it didn't work it for vlan1.

 

 

https://community.fortinet.com/t5/FortiGate/Technical-Tip-VXLAN-over-IPsec-for-multiple-VLANs-using-...

1 Solution
wdeloraine_FTNT

Hi, Usually VLAN1 is reserved for internal use. It depends of the hardware you have but if it's not working for VLAN1, most likely VLAN 1 is used by FortiOS.

 

https://docs.fortinet.com/document/fortigate/7.2.6/fortigate-6000-administration-guide/729353/vlan-i...

 

Regards, WD

WD

View solution in original post

6 REPLIES 6
Anthony_E
Community Manager
Community Manager

Hello Ahmet,


Thank you for using the Community Forum. I will seek to get you an answer or help. We will reply to this thread with an update as soon as possible.


Thanks,

Anthony-Fortinet Community Team.
Anthony_E
Community Manager
Community Manager

Hello Ahmet,

 

Did you have a look into this document:

 

https://docs.fortinet.com/document/fortigate/7.4.1/administration-guide/184150/vlan-inside-vxlan

 

Please, tell me if it is helpful or not.If not, we will continue to look for a solution.

 

Regards

Anthony-Fortinet Community Team.
ahmetyilmaz2050
New Contributor II

Hi Anthony,

 

we performed this solution for vlan100 or vlan200 but it doesn't work for vlan1.

 

Thank you.

Anthony_E
Community Manager
Community Manager

Thank you,

 

We will find somebody to help you.

 

Regards,

Anthony-Fortinet Community Team.
wdeloraine_FTNT

Hi, Usually VLAN1 is reserved for internal use. It depends of the hardware you have but if it's not working for VLAN1, most likely VLAN 1 is used by FortiOS.

 

https://docs.fortinet.com/document/fortigate/7.2.6/fortigate-6000-administration-guide/729353/vlan-i...

 

Regards, WD

WD
ahmetyilmaz2050
New Contributor II

thank you very much.