Hi,
We created the vxlan according to the document below. We can carry vlan50 or etc. but it didn't work it for vlan1.
Solved! Go to Solution.
Nominating a forum post submits a request to create a new Knowledge Article based on the forum post topic. Please ensure your nomination includes a solution within the reply.
Hi, Usually VLAN1 is reserved for internal use. It depends of the hardware you have but if it's not working for VLAN1, most likely VLAN 1 is used by FortiOS.
Regards, WD
Hello Ahmet,
Thank you for using the Community Forum. I will seek to get you an answer or help. We will reply to this thread with an update as soon as possible.
Thanks,
Hello Ahmet,
Did you have a look into this document:
https://docs.fortinet.com/document/fortigate/7.4.1/administration-guide/184150/vlan-inside-vxlan
Please, tell me if it is helpful or not.If not, we will continue to look for a solution.
Regards
Hi Anthony,
we performed this solution for vlan100 or vlan200 but it doesn't work for vlan1.
Thank you.
Thank you,
We will find somebody to help you.
Regards,
Hi, Usually VLAN1 is reserved for internal use. It depends of the hardware you have but if it's not working for VLAN1, most likely VLAN 1 is used by FortiOS.
Regards, WD
thank you very much.
Select Forum Responses to become Knowledge Articles!
Select the “Nominate to Knowledge Base” button to recommend a forum post to become a knowledge article.
User | Count |
---|---|
1517 | |
1013 | |
749 | |
443 | |
209 |
The Fortinet Security Fabric brings together the concepts of convergence and consolidation to provide comprehensive cybersecurity protection for all users, devices, and applications and across all network edges.
Copyright 2024 Fortinet, Inc. All Rights Reserved.