vxlan for vlan1

[ahmetyilmaz2050]

Hi,

We created the vxlan according to the document below. We can carry vlan50 or etc. but it didn't work it for vlan1.

https://community.fortinet.com/t5/FortiGate/Technical-Tip-VXLAN-over-IPsec-for-multiple-VLANs-using-...

[Anthony_E]

Hello Ahmet,

Thank you for using the Community Forum. I will seek to get you an answer or help. We will reply to this thread with an update as soon as possible.

Thanks,

[Anthony_E]

Hello Ahmet,

Did you have a look into this document:

https://docs.fortinet.com/document/fortigate/7.4.1/administration-guide/184150/vlan-inside-vxlan

Please, tell me if it is helpful or not.If not, we will continue to look for a solution.

Regards

[ahmetyilmaz2050]

Hi Anthony,

we performed this solution for vlan100 or vlan200 but it doesn't work for vlan1.

Thank you.

[Anthony_E]

Thank you,

We will find somebody to help you.

Regards,

[wdeloraine_FTNT · Accepted solution]

Hi, Usually VLAN1 is reserved for internal use. It depends of the hardware you have but if it's not working for VLAN1, most likely VLAN 1 is used by FortiOS.

https://docs.fortinet.com/document/fortigate/7.2.6/fortigate-6000-administration-guide/729353/vlan-i...

Regards, WD

[ahmetyilmaz2050]

thank you very much.