I have a virtual IP and it has access to the LAN but not to the INTERNET... of course, there is a policy allowing access to the Internet for this address
Nominating a forum post submits a request to create a new Knowledge Article based on the forum post topic. Please ensure your nomination includes a solution within the reply.
Please can you run the below commands to have a better view of the traffic path?
Putty 1
--------
# diagnose sniffer packet any "host x.x.x.x and host y.y.y.y" 4 0 l
*** Run for 5-10 minutes ***
*** x.x.x.x is the Source IP address and y.y.y.y is the destination IP ***
ctrl+C to stop
Putty 2
-------
# diag debug reset
# diagnose debug flow filter addr x.x.x.x y.y.y.y and
# diag debug console timestamp enable
# diag debug flow trace start 1000
# diag debug enable
*** x.x.x.x is the Source IP address and y.y.y.y is the destination IP ***
# diagnose debug disable
# diag debug reset
Best regards,
Erlin
Select Forum Responses to become Knowledge Articles!
Select the “Nominate to Knowledge Base” button to recommend a forum post to become a knowledge article.
User | Count |
---|---|
1519 | |
1019 | |
749 | |
443 | |
209 |
The Fortinet Security Fabric brings together the concepts of convergence and consolidation to provide comprehensive cybersecurity protection for all users, devices, and applications and across all network edges.
Copyright 2024 Fortinet, Inc. All Rights Reserved.