Support Forum
The Forums are a place to find answers on a range of Fortinet products from peers and product experts.
emnoc
Esteemed Contributor III

v6.0 is here

I hope it 's  all good  ;)

PCNSE 

NSE 

StrongSwan  

PCNSE NSE StrongSwan
3 Solutions
romanr
Valued Contributor

Andy Bailey wrote:

I've getting a "Failed to save some changes: Input value is invalid" message (showing in the attachment) when I try and modify a policy (for example add an anti-spam to an existing policy).

Hey,

 

I don't have that problem - works fine for me since Beta 3.

 

Can you run the following on a Command Line, while you try to modify a policy:

 

diag deb reset

diag deb ena

diag deb cli 8

 

... and post the output

 

Br,

Roman

View solution in original post

Jordan_Thompson_FTNT

romanr wrote:

Andy Bailey wrote:

I've getting a "Failed to save some changes: Input value is invalid" message (showing in the attachment) when I try and modify a policy (for example add an anti-spam to an existing policy).

 

Can you run the following on a Command Line, while you try to modify a policy:

 

diag deb reset

diag deb ena

diag deb cli 8

 

... and post the output

 

In addition, please enable "diag debug app httpsd -1" and include that output.

View solution in original post

thuynh_FTNT

Andy Bailey wrote:

I've attached the output your requested Roman and Jordan. Thanks for your help.

 

Nothing really obvious for me. I tried opening the policy and then clicking ok (no changes) and again (no changes) same result both times. I tried Edge instread of Firefox too- no changes there either.

 

The key lines seem to be:-

 

[httpsd 9510 - 1522869450    error] cmdb_commit_from_json[1426] -- error saving request object to CLI (-651) [httpsd 9510 - 1522869450    error] _api_cmdb_v2_config[1137] -- error editing object (nret=-651) [httpsd 9510 - 1522869450    error] api_return_http_result[516] -- API error -651 raised

Interestingly I can delete policies- I just tried deleting a couple of unused policies and that worked fine (highlighted from the "IPv4 Policy" list and then just delete.

 

Any other ideas?

Hi Andy, we've tried with several FGTs and were unable to reproduce your issue. Looks like it's specific to your config after upgrade. From your CLI debug output, the CLI is rejecting the change (any policy edit save) from the GUI.

0: config firewall policy 0: edit 15 0: set ssl-ssh-profile "SSL Certs-Block Untrusted\\Invalid" -651: end

 

Here are a few other things to try:

1. Can you use the CLI to edit a policy? You can use the above commands to see further error reported by the CLI

2. Can you use the GUI to create new Policy? if not, please also include CLI and httpsd debug message

3. Does this happen to any policy edit via the GUI? 4. Can you check if your interfaces are correctly upgraded?

5. Which FGT model are you using? if possible, can you share your full config with us? you can email me the config at thuynh@fortinet.com

 

Tri

View solution in original post

60 REPLIES 60
emnoc
Esteemed Contributor III

Are the existing users in the same DN format

CN= OU= OU= DC= DC=

 

What's different between old and new, if you use ldapsearch or ldptree query do you see anything that pops out at you ?

 

Ken

 

PCNSE 

NSE 

StrongSwan  

PCNSE NSE StrongSwan
Accionet

Thanks enmoc.

 

New_user is a clone of old_user. All the attributtes are the same but Exchange mailbo, that new user do not use.

 

 

Accionet

Hello again.

 

I've installed wireshark in the network and I've monitored LDAP queries.

 

The problem reproduces with user that use a Exchange Mailbox and configure mobile devices to configure antivesync.

 

AD creates a subkey in the user "CN=ExchangeActiveSyncDevices" and user that contains this key fail in LDAP queries.

 

It seems Its a Fortigate 6.0.0 bug. Not in 5.6.4 and previous releases.

 

I'll open a support ticket to inform for this issue.

 

Thank you.

emnoc
Esteemed Contributor III

A new issue arose over this past weekend. The usage of a mix 802.11  WPA/OPEN for wireless VAP  broke the  WPA-authentication in my FWW51E. I ended up  factory resetting my  unit since I was effectively locked out of   the wireless. I need to  dive deeper but the system event logs showed nothing.

PCNSE 

NSE 

StrongSwan  

PCNSE NSE StrongSwan
bommi
Contributor III

Multiple SSIDs with WPA2-PSK and one Open SSID with an Captive Portal are running fine here.

Used hardware is an fortiwifi 30E with 6.0.0 and an fortiap-11c with 5.6.2.

NSE 4/5/7

NSE 4/5/7
emnoc
Esteemed Contributor III

That's good to know, I will have to go back and retry but my home wifi was broken and kids and wife was complaining of the minidlna  server not working. So they couldn't get to the homeTV video network ;)

 

PCNSE 

NSE 

StrongSwan  

PCNSE NSE StrongSwan
thuynh_FTNT

Andy Bailey wrote:

I've attached the output your requested Roman and Jordan. Thanks for your help.

 

Nothing really obvious for me. I tried opening the policy and then clicking ok (no changes) and again (no changes) same result both times. I tried Edge instread of Firefox too- no changes there either.

 

The key lines seem to be:-

 

[httpsd 9510 - 1522869450    error] cmdb_commit_from_json[1426] -- error saving request object to CLI (-651) [httpsd 9510 - 1522869450    error] _api_cmdb_v2_config[1137] -- error editing object (nret=-651) [httpsd 9510 - 1522869450    error] api_return_http_result[516] -- API error -651 raised

Interestingly I can delete policies- I just tried deleting a couple of unused policies and that worked fine (highlighted from the "IPv4 Policy" list and then just delete.

 

Any other ideas?

Hi Andy, we've tried with several FGTs and were unable to reproduce your issue. Looks like it's specific to your config after upgrade. From your CLI debug output, the CLI is rejecting the change (any policy edit save) from the GUI.

0: config firewall policy 0: edit 15 0: set ssl-ssh-profile "SSL Certs-Block Untrusted\\Invalid" -651: end

 

Here are a few other things to try:

1. Can you use the CLI to edit a policy? You can use the above commands to see further error reported by the CLI

2. Can you use the GUI to create new Policy? if not, please also include CLI and httpsd debug message

3. Does this happen to any policy edit via the GUI? 4. Can you check if your interfaces are correctly upgraded?

5. Which FGT model are you using? if possible, can you share your full config with us? you can email me the config at thuynh@fortinet.com

 

Tri

storaid

bug(s):

1. can not add additional MACs for device object

2. device type: Windows Device????? 

 

BTW,

device detection still is very very bad....

 

FWF60D x2 FWF60C x3 FGT80C rev.2 FGT200B-POE FAP220B x3 FAP221B x2

FSW224B x1

FWF60D x2 FWF60C x3 FGT80C rev.2 FGT200B-POE FAP220B x3 FAP221B x2 FSW224B x1
Bruno_Pereira
New Contributor III

I have found BUG ID 0480176: "sslvpn crash signal 11 and Forticlient users disconnect" The solution is wait for firmware 6.0.1 that will be delivered on May 28, 2018

ijquest
New Contributor

Hi, I´ve recently installed FortiOS 6.0 (v6.0.0 build0076 (GA)) in two FG´s (200E & 100E), and the "Web Rating Overrides" doesn´t work again. In this version, Fortigates ignores the Web Rating Overrides configuration.

 

Any solution please? Thanks

Announcements

Select Forum Responses to become Knowledge Articles!

Select the “Nominate to Knowledge Base” button to recommend a forum post to become a knowledge article.

Labels
Top Kudoed Authors