user traffic control

[abdulasaad]

my fiends , 

can FG direct the traffic of specific user through a specific WAN ? like book this WAN only for this user . 

thanks :)

[tioeudes]

config router static edit 0 set device <wan port> set gateway <ip address of the gateway of that wan port you selected above> set destination (0.0.0.0/.0.0.0.0 for everything or de subnet you want ot be accessed from this wan link) end

OR config router policy edit 0 set input-device <source interface> set src <ip or netmask of the source of the traffic you want to route> set output-device <wan port> set dst <ip or netmask of the source of the traffic you want to route> 0.0.0.0/.0.0.0.0 for everything set gateway <ip address of the gateway of that wan port you selected above> set action permit

end

See that with router policy you can define the source too, not only the destination.

Hope it helps,

tioeudes

[Vishalv16]

you can check out policy route  option in network just below static route & select the wan port on which you want to divert traffic on.(am assuming you have basic knowledge about fortigate) Vishal