Support Forum
The Forums are a place to find answers on a range of Fortinet products from peers and product experts.
abdulasaad
New Contributor

user traffic control

my fiends , 

 

can FG direct the traffic of specific user through a specific WAN ? like book this WAN only for this user . 

 

thanks :)

 

2 REPLIES 2
tioeudes
Contributor

 

config router static edit 0 set device <wan port> set gateway <ip address of the gateway of that wan port you selected above> set destination (0.0.0.0/.0.0.0.0 for everything or de subnet you want ot be accessed from this wan link) end

OR config router policy edit 0 set input-device <source interface> set src <ip or netmask of the source of the traffic you want to route> set output-device <wan port> set dst <ip or netmask of the source of the traffic you want to route> 0.0.0.0/.0.0.0.0 for everything set gateway <ip address of the gateway of that wan port you selected above> set action permit

end

 

 

 

See that with router policy you can define the source too, not only the destination.

 

Hope it helps,

tioeudes

Vishalv16
New Contributor

you can check out policy route  option in network just below static route & select the wan port on which you want to divert traffic on.(am assuming you have basic knowledge about fortigate) Vishal 

[size="1"] FGT100E,FGT100D,FGT300C,FGT300E[/size] FortiOS 5.2, 5.4, 5.6,6.0,6.0.2 and 6.2

[size="1"] FGT100E,FGT100D,FGT300C,FGT300E[/size] FortiOS 5.2, 5.4, 5.6,6.0,6.0.2 and 6.2
Announcements

Select Forum Responses to become Knowledge Articles!

Select the “Nominate to Knowledge Base” button to recommend a forum post to become a knowledge article.

Labels
Top Kudoed Authors