updated to MR3 patch 6 and now the web ui doesnt load

[dmmillr1]

doesnt load, or is very unresponsive. I can get the dashboard but thats pretty much it. was working fine on patch 5 have tried IE8 and 9, the current version of chrome I' m in the middle or trying to deploy a 40C for a VPN link to the 60 and its hard to do when I cant confgire the 60 :(

[ddskier]

Have you tried power cycling the unit? If not, you might have had a bad firmware download/upload. You might have to reload it via console cable.

[dmmillr1]

that is exactly what I had to do. console + tftp this morning, working great now!

[dmmillr1]

its happening again. the 60' s CPU decides to peg itself at near 100%

[Coldfirex]

use ' diag sys top' to see if its a certain process always using the CPU.