Dear All,
I have created system link-monitor for port5 in fortigate 201F with version 7.4.1, and i would like to remove the link-monitor in port5 and i couldnt remove it, just wonder is below command correct to remove the link-monitor ? and after i ran this commpand i try to add port5 into the hardware switch but its seems that port5 is disappeared in the field, any help would be appreicated
Get in the master unit then :
config sys ha
unset pingserver-monitor-interface
unset monitor
end
piaakit
Nominating a forum post submits a request to create a new Knowledge Article based on the forum post topic. Please ensure your nomination includes a solution within the reply.
The command you entered should be enough, please run "show | grep port5 -f" to check if there is any other related configuration for this port.
Hi @piaakit1210,
If you are talking about link-monitor, it should be configured under 'config system link-monitor'. Please check if you have any outputs from 'show system link-monitor'.
Regards,
Hi @piaakit1210,
In addition to check the ref, have you try to remove from GUI?
Hi,
You may run these commands to verify if port5 in link monitor config:
#config system link-monitor
#sh full | grep port5
Alternatively, you may check in GUI (reference for port5 in Interface).
Select Forum Responses to become Knowledge Articles!
Select the “Nominate to Knowledge Base” button to recommend a forum post to become a knowledge article.
User | Count |
---|---|
1536 | |
1028 | |
749 | |
443 | |
210 |
The Fortinet Security Fabric brings together the concepts of convergence and consolidation to provide comprehensive cybersecurity protection for all users, devices, and applications and across all network edges.
Copyright 2024 Fortinet, Inc. All Rights Reserved.