hi
hello all
I need to replace a FGT200B v5.2.13,build762 (GA) with a FGT 400D v6.4.9 build1966 (GA) but I can't find the option to add "device"
User and Device -> Device -> Device Definitions
present on the FGT200B
is it a device or firmware version problem for the FTG400D?
any suggestions about new hardware and firmware.
thanks a lot
Massimo
Solved! Go to Solution.
Nominating a forum post submits a request to create a new Knowledge Article based on the forum post topic. Please ensure your nomination includes a solution within the reply.
Hey itsunitelm,
you have jumped quite a few firmware versions between 5.2.13 and 6.4.9. There was a change in device management in 6.4, and I wrote a KB on that three years ago:
https://community.fortinet.com/t5/FortiGate/Technical-Tip-Changes-in-device-management/ta-p/196826
Basically, devices are treated as firewall addresses starting in 6.4, and you can create an address of type 'Device', instead of creating it under Users&Devices.
Hey itsunitelm,
you have jumped quite a few firmware versions between 5.2.13 and 6.4.9. There was a change in device management in 6.4, and I wrote a KB on that three years ago:
https://community.fortinet.com/t5/FortiGate/Technical-Tip-Changes-in-device-management/ta-p/196826
Basically, devices are treated as firewall addresses starting in 6.4, and you can create an address of type 'Device', instead of creating it under Users&Devices.
thank you so much for your prompt reply
Best regards
Select Forum Responses to become Knowledge Articles!
Select the “Nominate to Knowledge Base” button to recommend a forum post to become a knowledge article.
User | Count |
---|---|
1547 | |
1031 | |
749 | |
443 | |
210 |
The Fortinet Security Fabric brings together the concepts of convergence and consolidation to provide comprehensive cybersecurity protection for all users, devices, and applications and across all network edges.
Copyright 2024 Fortinet, Inc. All Rights Reserved.