Support Forum
The Forums are a place to find answers on a range of Fortinet products from peers and product experts.
vidyashankar
New Contributor

torrent download block

Hai i want to restrict torrent download. in this case here we have around 50 system all under static ip. then some of them using DHCP. so i want to block torrent download for 45 users and allow for 5 users. is it possible, then suggest the steps.

i am using fortigate 60d

1 Solution
gschmitt
Valued Contributor

If they have static IPs it's no problem at all

 

Navigate to Policy&Objects > Objects > Addresses and select Create New

Name: Allow_Torrent

Type: IP Range

and enter the IP Range of the allowed users (or create an object per IP Adress with the netmask /32 and group them)

 

Do the same for Block_Torrent

 

if you need to use different objects not IP ranges I recommend you also select the little Arrow next to Create New and create a group containing the Allow_Torrent and another containing the Block_Torrent address objects

 

Now go to Security Profiles > Application Control

Create a new Application Sensor named BlockTorrent (If you do not have the option you can enable Multiple Profiles at System > Config > Features)

In this profile below Application Override select Add Signatures

Search for "Torrent" in the top right search field

Select all Torrent Signatures and click Use Selected Signatures

Make sure the Action is set to blocked

 

Now go to Policy&Objects > IPv4 > Policies and Create New

Source Interface: internal (or where your clients are)

Source address Allow_Torrent

Destination Interface: wan1 (your Internet connection)

Destination address: all

Configure the rest as needed

 

Create a New policy same as above but select:

Source Address: Block_torrent

Enable the Application Control Profile BlockTorrent

View solution in original post

1 REPLY 1
gschmitt
Valued Contributor

If they have static IPs it's no problem at all

 

Navigate to Policy&Objects > Objects > Addresses and select Create New

Name: Allow_Torrent

Type: IP Range

and enter the IP Range of the allowed users (or create an object per IP Adress with the netmask /32 and group them)

 

Do the same for Block_Torrent

 

if you need to use different objects not IP ranges I recommend you also select the little Arrow next to Create New and create a group containing the Allow_Torrent and another containing the Block_Torrent address objects

 

Now go to Security Profiles > Application Control

Create a new Application Sensor named BlockTorrent (If you do not have the option you can enable Multiple Profiles at System > Config > Features)

In this profile below Application Override select Add Signatures

Search for "Torrent" in the top right search field

Select all Torrent Signatures and click Use Selected Signatures

Make sure the Action is set to blocked

 

Now go to Policy&Objects > IPv4 > Policies and Create New

Source Interface: internal (or where your clients are)

Source address Allow_Torrent

Destination Interface: wan1 (your Internet connection)

Destination address: all

Configure the rest as needed

 

Create a New policy same as above but select:

Source Address: Block_torrent

Enable the Application Control Profile BlockTorrent

Announcements

Select Forum Responses to become Knowledge Articles!

Select the “Nominate to Knowledge Base” button to recommend a forum post to become a knowledge article.

Labels
Top Kudoed Authors