I have implemented fortigate 100F. I was trying to upgrade firmware version 6.4.6 to version 7.2. Currently, the firewall does not boot, neither does it provide any menu to select. Below is the message it shows when I restart it:
Nominating a forum post submits a request to create a new Knowledge Article based on the forum post topic. Please ensure your nomination includes a solution within the reply.
Hey bobwaithaka,
that doesn't look very healthy - if you get this repeatedly when power-cycling the unit, and you don't even get the prompt 'press any key to interrupt boot', then there's very little we can do.
I would suggest you open a ticket with Fortinet support; they may be able to suggest additional steps to see if the unit is recoverable, and if not, depending on your service contract, may be able to help you get a replacement unit.
Cheers,
Debbie
Hello Debbie, thank you a lot for the information and advise. I have initiated a chat session with Fortinet support and i'm hopeful that we'll find a solution. I'll keep you updated
Hi @bobwaithaka
Did you upgrade the firmware directly to 7.2 or follow the upgrade path? Seems like you are facing this: https://community.fortinet.com/t5/FortiGate/Technical-Tip-Boot-failure-after-upgrading-to-v7-0-15/ta...
You may follow the steps here to restore access: https://community.fortinet.com/t5/FortiGate/Technical-Tip-Boot-the-backup-firmware-and-config-via-co...
Select Forum Responses to become Knowledge Articles!
Select the “Nominate to Knowledge Base” button to recommend a forum post to become a knowledge article.
User | Count |
---|---|
1665 | |
1077 | |
752 | |
446 | |
220 |
The Fortinet Security Fabric brings together the concepts of convergence and consolidation to provide comprehensive cybersecurity protection for all users, devices, and applications and across all network edges.
Copyright 2024 Fortinet, Inc. All Rights Reserved.