- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
some new address objects does not appear
i created some wildcard FQDN type of address objects but it does not appear as destination objects when i try to create rules.
my firmware is 5.4.4, FG300D
am i missing something ?
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hi there,
try to set interface to any and check if it appears then.
Regards
sudo apt-get-rekt
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Read the caution in the online manual below. It can't be used as an address object in a policy.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
ok, looks like i cant use wildcard FQDN as address objects
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
hm I gues that's because a FQDN with a wildcard in it is not a valid FQDN is it?
--
"It is a mistake to think you can solve any major problems just with potatoes." - Douglas Adams
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
As the caution states, it's simply because FGT tries to resolve any address objects in the policy with a DNS server, which would fail because of the wildcard. 5.6 expanded "Internet Service" feature to policies to cover the same concept with wildcard FQDN has.