set led-state disbale on AP Profile not working on 7.0.4 (v7.0-build0060)

[sanderl]

Previously on FortiAp 6.2 I could easily turn on and off the LEDs on the AP by following:

https://docs.fortinet.com/document/fortiap/7.0.4/fortiwifi-and-fortiap-configuration-guide/948780/le...

Now after flashing my FortiAP-221E to (v7.0-build0060) I can enable the command. But despite being there it does not turn off the LEDs. Also directly on the AP itself it does not turn on/off.

What's wrong here?

[sanderl]

Hm... now after rebooting light are out. That's not what I am used to see. Normally I was bale to turn on and off without a reboot of the AP...?

[Adolfo_Z_H]

try to use Schedules using AP profiles, i used every day on FOS 7.0.6 and 7.2.1. no issues.

# config firewall schedule recurring

(recurring) # show
config firewall schedule recurring
edit "Leds-on"
set start 08:00
set end 18:00
set day monday tuesday wednesday thursday friday
next
end

(recurring) #

end

config wireless-controller wtp-profile

edit "FAP221E-your_profile"
set led-schedules "Leds-on"
next
end

check if your are using rigth AP profile or AP config.

use led test feature to locate correct AP to discard device confusions.