separate wan 1 and wan 2

[hitsu]

Hello all,

I just want to ask, how to setting wan 1 only used for internet internal, and I want use wan 2 only for vpn I have?

[Fullmoon]

configure both default routes same distance and diff priority

example:

WAN1 distance is 10 and Priority is 10

WAN2 distance is 10 and Priority is 20

In this manner ALL Outgoing traffic coming from your LAN to Internet will use WAN1 as preferred link. Now you can use WAN2 for IPSEC or SSL VPN from incoming traffic.

[hitsu]

I'm setting for failover now, so i must disable first?

[hitsu]

If I already setup spillover in ECMP Load Balancing Method, how can i disable that in 5.4?