Nominating a forum post submits a request to create a new Knowledge Article based on the forum post topic. Please ensure your nomination includes a solution within the reply.
Since you can't create two separate SSID sharing the same name I suppose you can achieve your requirement by configuring VLAN assignment by FortiAP group or to use bridged SSID.
Hi @onurg,
SSID can be overridden and configured per FortiAP basis. You can use the following commands:
config wireless-controller wtp
edit <wtp-id> <<< FortiAP serial number.
set override-vaps
set vaps <SSID1> <<< Manually set SSID for this FortiAP.
end
config radio-2
set override-vaps
set vaps <SSID1>
end
Regards,
I wouldn't try keeping the same SSID (broadcast) name if DHCP ranges are different. I would set like "xxx-guest-1" and "xxx-guest-2" so that users can choose which to connect to, especially when each SSID is bound to a particular FAP.
On the same token, we even name like "xxx-guest-5G" and "xxx-guest-24G" so that they can know which radio on one FAP they are connecting to. It makes our troubleshooting (mostly user issues) much easier.
I know I'm not answering your particular question.
Toshi
Hello,
Duplicate SSID can be enabled by using the following commands:
config wireless-controller setting set duplicate-ssid enable
Select Forum Responses to become Knowledge Articles!
Select the “Nominate to Knowledge Base” button to recommend a forum post to become a knowledge article.
User | Count |
---|---|
1702 | |
1092 | |
752 | |
446 | |
228 |
The Fortinet Security Fabric brings together the concepts of convergence and consolidation to provide comprehensive cybersecurity protection for all users, devices, and applications and across all network edges.
Copyright 2024 Fortinet, Inc. All Rights Reserved.