routing between two subnets/ unable to connect to devices( printer/NAS)

[antoniocerasuolo]

hi,

I have two subnets :

wifi 10.8.8.0/24

internal 172.22.2.0/24 ( NAS,Printer)

I have created policies to route from wifi->internal and internal ->wifi, I am able to ping the NAS  and Printer from the wifi network but am unable to access the actual devices. in the policies in the source and destination i used the actual subnets and not the usual "all" for the policies, is this correct? I had also tried with all but didn't seem to work either so the issue must be something else...

I am able to access the fortigate admin on the internal from the wifi subnet but that seems to be about all i am able to do..

any idea how to get the visibility of the devices?

ciao,

Antonio

[antoniocerasuolo]

at this stage i agree with yoiu this is not a fortigate issue!

[dingjerry_FTNT]

If you have only those 3 firewall policies, this may not be a FortiGate issue.

If you have other firewall policies, please try to disable all of them, just leave policy #29 for testing.