route

[sims]

Hi ,

I created a static route , but for some reason its not working . How can i verify that why it is not working . for example is there a command like sh ip route  or debug.

for example the client gate way is  192.168.1.5 , to access 192.168.2.10  they must go to the 192.168.1.1 and all other must be through wan interface

[Sylvia]

You can see all active routes in the Routing Monitor (or in the CLI with get router info routing-table all).

If a route do not appear there, it can be due to different reasons:

- there is another route with the same destination but better distance

- the outgoing interface ("device") is down

- the gateway ip is not in the same subnet then the outgoing interface

Please check.