- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
remove gateway ip on forticlient
how do i remove the fortigate EMS ip address on my forticlient since i am no longer using the EMS?
even when i uninstall the forticlient, the gateway ip list still shows the EMS server ip address.
as i can still see it trying to access the server port 8013.
- Labels:
-
5.4
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Make sure that your client is de-registered from EMS first, otherwise if EMS can has access to your machine, it will re-attempt install and configuration.
Make sure that this directory is empty - C:\Windows\FortiEMSInstaller.
Make sure you are using a fresh/new installer file - not a repackaged one that includes the configuration for EMS.
Run FCRemove.exe after uninstalling FortiClient. It is available in the FortiClientTools package on the support site, under firmware images for FortiClient.
I had the same issue and ultimately had to run that removal tool after uninstalling FCT.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
it works after i uninstall version 5.4.1 and installed version 5.6.
no more polling to port 8013
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
I think You need to remove / or unassign the Telemetry gateway list from that group . see attached.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Also forgot to mention, if you have a Fortigate firewall. the internal interface is always listening on port 8013; so you would have to disable that feature on the firewall