Support Forum
The Forums are a place to find answers on a range of Fortinet products from peers and product experts.
slothy
New Contributor

remove device and block form certain SSID's

i swore i was able to do this before, but is there a way to block a device (or even better yet all mobile devices) on a certain SSID and only allow them on the other SSID? 

 

foritnet 100d (5.4) with 4 FP221B-v5.4. we have our guest network (which i want the mobile deivces to use) and our network side SSID, which a few people seem to seem connect to since they know the password. 

 

thanks

brian

 

 

 

1 Solution
Dave_Hall
Honored Contributor

If this was on 5.0.x codebase, you would create a standard DHCP server for the wifi SSID, and set the Unknown MAC Address" option to either assign or block.  I am assuming it is still the same/similar option on 5.4 firmware.

 

 

NSE4/FMG-VM64/FortiAnalyzer-VM/6.0 (FWF30E/FW92D/FGT200D/FGT101E/FGT81E)/ FAP220B/221C

View solution in original post

NSE4/FMG-VM64/FortiAnalyzer-VM/6.0 (FWF30E/FW92D/FGT200D/FGT101E/FGT81E)/ FAP220B/221C
3 REPLIES 3
Dave_Hall
Honored Contributor

If this was on 5.0.x codebase, you would create a standard DHCP server for the wifi SSID, and set the Unknown MAC Address" option to either assign or block.  I am assuming it is still the same/similar option on 5.4 firmware.

 

 

NSE4/FMG-VM64/FortiAnalyzer-VM/6.0 (FWF30E/FW92D/FGT200D/FGT101E/FGT81E)/ FAP220B/221C

NSE4/FMG-VM64/FortiAnalyzer-VM/6.0 (FWF30E/FW92D/FGT200D/FGT101E/FGT81E)/ FAP220B/221C
slothy

thank you, i did figure that part out after i posted - same way on 5.4 pretty much.  i need to readup and see if i can block all mobile devices on a SSID from joining

osipof
New Contributor

It seems the MAC address access control list option has been removed from firmware 5.2.5

Announcements

Select Forum Responses to become Knowledge Articles!

Select the “Nominate to Knowledge Base” button to recommend a forum post to become a knowledge article.

Labels
Top Kudoed Authors