I have a 30E device running firmware 6.0.4. I have the following phase1-interface S2S config:
edit "1176" set interface "wan" set ike-version 2 set keylife 28800 set authmethod signature set proposal aes256-sha1 set dpd disable set comments "VPN: 1176 (Created by VPN wizard)" set dhgrp 5 set nattraversal disable set remote-gw REMOTEIP set certificate CERT set peer "1176_peer" next
According to debug logs on both the Fortinet and the other site (a Cisco ASA 5506), the Fortinet is still sending DPD messages every 10 seconds.
How do I fix this problem?
Nominating a forum post submits a request to create a new Knowledge Article based on the forum post topic. Please ensure your nomination includes a solution within the reply.
Select Forum Responses to become Knowledge Articles!
Select the “Nominate to Knowledge Base” button to recommend a forum post to become a knowledge article.
User | Count |
---|---|
1546 | |
1030 | |
749 | |
443 | |
210 |
The Fortinet Security Fabric brings together the concepts of convergence and consolidation to provide comprehensive cybersecurity protection for all users, devices, and applications and across all network edges.
Copyright 2024 Fortinet, Inc. All Rights Reserved.