" Unclassified" Traffic Direction on Report

[#1]

Hi, after create a Layout and schedule, it' s generate a Report. The first page is " Web Traffic" . On sub-item called " Traffic Volume by Direction" , the content on " Traffic Direction" columm appear " Unclassified" instead of " incoming" or " outgoing" . My FortiAnalyer is FA-100B and fw 4.0MR2 Thank' s for any help.

[rwpatterson]

Perhaps you have a DMZ port defined? Traffic to that may fit that mold.

[#3]

No. I just have configure internal (LAN), wan1 (ISP1) and wan2 (ISP2) on Fortigate.

[#4]

ah! My fortigate is fw 4.0MR2 too.

[rwpatterson]

In the FAZ, you identify which ports are LAN, WAN, and DMZ. Check there in the definition area for the FGT.

[#6]

I don' t understand.Where in the FAZ I verify this ? DEVICE ?

[#7]

In the FAZ -> Log & Archive -> Traffic, I select FGT Device, add columm " Source Interface" and " Destination Interface" and I see " internal" , " wan2" and " wan1" .

[#8]

I user 4.0MR2 fw on he FAZ-100B. This option does not exist. Do you think better I open ticket in the Fortinet support site ? thanks

[rwpatterson]

In the FAZ (v4.0.3), open ' Device > All' , select your FGT device, edit it, and at the bottom, you will see ' FortiGate Interface Specification' . Here you let the FAZ know what the interfaces are used for.

[#10]

In the FAZ 4.0MR2 does not exist Interface to configure on Device -> All Devices -> Allowed. Mark my FGT -> Edit. The sections are: Device Type, Device Name, Device ID, Disk Allocation, Device Privileges, Description and Mode.