FortiClient and its "FortiClient Logging daemon - FCDBLog.exe" process is permanently at high CPU (minimum 12% or 13% CPU, but up to 25%) and it uses up to 6 GB of RAM !!!!
Even if I shutdown forticlient, this process stays pending there, and consuming this CPU and RAM !!!
I tried to lower the log level to minimal (Alert or Emergency), but this does not change anything !!!
I just need a VPN client, I do not need a thread vulnerability scan or a logger or anything !!!
What can I do to get rid of this process (except from "uninstalling" this product, which is imposed to me by a customer) ??
Thank you,
Ju.
PS : This is maybe occuring because I have a new PC ?
Nominating a forum post submits a request to create a new Knowledge Article based on the forum post topic. Please ensure your nomination includes a solution within the reply.
I don't know what the process does but to disable local logging, you can go to Settings and uncheck all features for logging like VPN, Update, Vulnerability Scan, Telemetry if they're enabled.
But I think it's rather because of the FC version than PC version.
Hi Ju,
You did not specify which version you are on, however there is a known issue which was resolved in FortiClient 6.0.4.
Please see the 6.0.4 release notes Resolved Issues section (https://docs.fortinet.com/d/forticlient-6.0.4-windows-release-notes) page 14:
"522496 FCDBLog.exe keeps crashing."
Regards
Hi,
Thanks for that answer !
I am on the only version I found online on https://forticlient.com/downloads
Version 6.0.0 for Windows.
=> Where could I found the 6.0.4 version ???
Regards,
Ju
Hi,
Thanks for that answer !
I am on the only version I found online on https://forticlient.com/downloads
Version 6.0.0 for Windows.
=> Where could I found the 6.0.4 version ???
Regards,
Ju
Woops...
Checking version, I noticed that I am already on 6.0.4.0182 (for windows).
=> The problem does not seem solved...
Hi all
Same problem here, only one of our PC have the problem (my W10 PC).
The problem appeared with 6.0.3 to 6.0.4 upgrade, and is still present after 6.0.5 upgrade and full uninstall (FC Tools) and reinstall. As 5 other PCs didn't show the same problem, the opened ticket has been closed after many investigations, and the conclusion that this is specific to my Windows :(
Yesterday, upgrade of a Windows 2016 server from 6.0.3 to 6.0.5 leads to the same problem.
So for me, the problem is still here and I will have to reopen a ticket...
Hello,
We are facing same issue, we were on 6.0.4.
We tried with 6.0.6 but same problem.
Did you re-open a ticket and did you have any answer?
Thank you.
Hello
Only two PCs on eighteen experienced the problem (mine and another one a few months later).
I have even upgraded to 6.0.8 without success BUT… when we upgraded our Windows 10 1803 to 1909, the problem disappeared!
Should have been a problem within Windows, but the support was unable to reproduce/understand why; they stated about software incompatibility with MalwareBytes, but that wasn't.
Good luck
in the Task Manager you can select the process and choose Efficiency mode as it seems working with me
Select Forum Responses to become Knowledge Articles!
Select the “Nominate to Knowledge Base” button to recommend a forum post to become a knowledge article.
User | Count |
---|---|
1702 | |
1092 | |
752 | |
446 | |
228 |
The Fortinet Security Fabric brings together the concepts of convergence and consolidation to provide comprehensive cybersecurity protection for all users, devices, and applications and across all network edges.
Copyright 2024 Fortinet, Inc. All Rights Reserved.