"Custom 1 " and "Custom 2" Inside DNS and Antivirus Web Filter

[Network_Engineer]

I realized that there is a custom 1 and custom 2 setting inside my DNS and Antivrus web filter.

Where can I find more info about this and can I edit the settings?  

[jintrah_FTNT]

Hi,

These settings are mainly used to override a url from FortiGuard defined category. Please check the local or custom categories section here https://docs.fortinet.com/document/fortigate/6.0.0/handbook/7204/overriding-fortiguard-website-categ...

Best regards,

Jin

[Network_Engineer]

Hi,

" If your FortiGate is operating with flow-based inspection and the policy-based NGFW mode, then you will not see the Edit Web Filter profile page."

In that case, how am I supposed to see the custom policies? 

[jintrah_FTNT]

Hello,

Why it should worry you because you were seeking info on custom1 and custom2 options which are available to you now.

best regards,

Jin

[Network_Engineer]

What happens if I enable custom1 and custom2 at the same time?

Or if I enable custom1 and static url at the same time? 

[jintrah_FTNT · Accepted solution]

Hi,

It is fine to mix and match required categories custom1 and/or custom2 and/or static url filter. Url filter would be first checked against FortiGuard/Custom categories.

best regards,

Jin