policy basic

[sims]

Hi, For the below policy , NO NAT , what are the routing required ?  Policy basic From  Interface : Inside  10.0.2.1 To Interface  : outside  192.168.100.100 source :  192.168.2.100 Dest : 192.168.8.100       Thanks 

[ede_pfau]

You need a static route like this:

destination 192.168.8.0/24 (whole subnet) or 192.168.8.100/32 (host only)

interface: outside

gateway: 192.168.100.xxx - IP address of the next router on the outside subnet

leave distance at 10

[sw2090]

additionally:

if your FGT does have a physical,logical or vlan interface in each of the two subnets you don't need top set up any routes because in this case you already have them via those interfaces with setting up the interfaces.