no-ip.org

[Foocow]

Is it possible to set no-ip.org as a generic DDNS provider in FortiGate 30D? If possible, how would the CLI syntax look like?

[GusTech]

Welcome! CLI: config system ddns edit <index_int> set ddns-domain <ddns_domain_name> set ddns-password <ddns_password> set ddns-server <ddns_service> set ddns-username <ddns_username> set monitor-interface <interfaces> end

[Foocow]

Thanks! That was one of the first things i tried since it is the most logical but it fails on the ddns-server as the no-ip server is not in the list of default servers supported.

[Dave_Hall]

What happens if you enter it as a generic DDNS server?

 config system ddns
   ddns-server genericDDNS
   ddns-server-ip <ipv4_addr>
 end

[Foocow]

I' ve tried that too and when I choose Generic I loose the authentication option, ddns-username and ddns-password. From what I understand the GenericDDNS option only supports DDNS service providers that supports RFC2136 which no-ip.org doesn' t... as far as i know.