Support Forum
The Forums are a place to find answers on a range of Fortinet products from peers and product experts.
yeowkm99
Contributor

networking monitoring using snmpv3

we are settinng up our own networking monitoring tools using Opmanager.

what is the proper way to configure snmpv3 for our fortigate firewall so that the Opmanager can recognize our firewalls ?

1 Solution
ozkanaltas
Valued Contributor III

Hello @yeowkm99 ,

 

You can follow this guide to configure SNMPv3.

 

https://docs.fortinet.com/document/fortigate/7.4.4/administration-guide/325005/basic-configuration

 

If you have found a solution, please like and accept it to make it easily accessible to others.
NSE 4-5-6-7 OT Sec - ENT FW

View solution in original post

If you have found a solution, please like and accept it to make it easily accessible to others.NSE 4-5-6-7 OT Sec - ENT FW
4 REPLIES 4
ozkanaltas
Valued Contributor III

Hello @yeowkm99 ,

 

You can follow this guide to configure SNMPv3.

 

https://docs.fortinet.com/document/fortigate/7.4.4/administration-guide/325005/basic-configuration

 

If you have found a solution, please like and accept it to make it easily accessible to others.
NSE 4-5-6-7 OT Sec - ENT FW
If you have found a solution, please like and accept it to make it easily accessible to others.NSE 4-5-6-7 OT Sec - ENT FW
mle2802
Staff
Staff

Hi @yeowkm99,

What is your firmware version? I found this document on an older version but let me know what is your current one and I can attach a newer version document https://docs.fortinet.com/document/fortigate/6.2.16/cookbook/457149/snmp-v3-users

Regards, 

yeowkm99

using ver 7.2.8

Announcements

Select Forum Responses to become Knowledge Articles!

Select the “Nominate to Knowledge Base” button to recommend a forum post to become a knowledge article.

Labels
Top Kudoed Authors