we are settinng up our own networking monitoring tools using Opmanager.
what is the proper way to configure snmpv3 for our fortigate firewall so that the Opmanager can recognize our firewalls ?
Solved! Go to Solution.
Nominating a forum post submits a request to create a new Knowledge Article based on the forum post topic. Please ensure your nomination includes a solution within the reply.
Hello @yeowkm99 ,
You can follow this guide to configure SNMPv3.
https://docs.fortinet.com/document/fortigate/7.4.4/administration-guide/325005/basic-configuration
Hello @yeowkm99 ,
You can follow this guide to configure SNMPv3.
https://docs.fortinet.com/document/fortigate/7.4.4/administration-guide/325005/basic-configuration
Hello @yeowkm99 ,
once configured if you are having issues, you can refer to this troubleshooting article for SNMPv3
https://community.fortinet.com/t5/FortiGate/Troubleshooting-Tip-SNMPv3-debug-error-USM-decryption-er...
https://community.fortinet.com/t5/FortiGate/Technical-Tip-How-to-troubleshoot-on-FortiGate-when-SNMP...
Hi @yeowkm99,
What is your firmware version? I found this document on an older version but let me know what is your current one and I can attach a newer version document https://docs.fortinet.com/document/fortigate/6.2.16/cookbook/457149/snmp-v3-users
Regards,
using ver 7.2.8
Select Forum Responses to become Knowledge Articles!
Select the “Nominate to Knowledge Base” button to recommend a forum post to become a knowledge article.
User | Count |
---|---|
1502 | |
1011 | |
749 | |
443 | |
209 |
The Fortinet Security Fabric brings together the concepts of convergence and consolidation to provide comprehensive cybersecurity protection for all users, devices, and applications and across all network edges.
Copyright 2024 Fortinet, Inc. All Rights Reserved.