network subnet assign to between physical interface and internal wifi interface

[wize]

Model: ForitGate-50G

I would like to assign the same IP range subnet to between physical interface and internal wifi interface:

Lan 1: 192.168.1.1/27

internal wifi: 192.168.1.1/27

by default system be return warning msg some Lan1 or wifi interface subnet used.

as above case, does it should be add a FortiAP or switch device to solve it? 

[AEK]

There are at least 2 solutions to put them in the same VLAN (and subnet):

1. Use bridge mode SSID instead of tunnel mode

2. Or put both physical interface and SSID in the same software switch

[wize]

Hi AEK
thanks for solutions provided.

but:
1. Use bridge mode SSID instead of tunnel mode <-is work, but I connect the SSID, and the SSID cannot assign to FortiAP profile.

2.put both physical interface and SSID in the same software switch <-when I created tunnel model of SSID which it cannot assign to software switch.

is it my configure problem?

[ebilcari]

For the second option, make sure that the SSID doesn't have the toggle 'Create address object matching subnet' enabled:

[AEK]

I can do it in my lab. Here test1 is a tunnel mode SSID (without configured IP address).

Try check if there are no dependencies that are preventing you to do so.