multiple IPsec VPN on on one interface

Saba1989 · ‎03-10-2020

hi guys i have a 200D fortigate and also 2 wan interface connected to 2 different ISPs i should configure more than 6 IPsec VPN for some reasons but i can configure 1 VPN on any wan interface.when i configured 2 vpn the first went down . i have to disable the second one in order to fix the first. what is wrong? how do i fix it?

rwpatterson · ‎03-10-2020

I currently have an ancient FWF81C that has many IPSec tunnels on the WAN interface. To boot it is using a dynamic IP address. Obviously there is a misconfiguration somewhere in your setup. Now you say the tunnel 'goes down'. Does the IPSec session drop or does the routing fail?

Bob - self proclaimed posting junkie!
See my Fortigate related scripts at: http://fortigate.camerabob.com

emnoc · ‎03-10-2020

If you provide more details like a config or topology we might be able to help.

Ken Felix

PCNSE

NSE

StrongSwan

rwpatterson · ‎03-10-2020

See the second post in the link below. It may answer your question.

[link]https://forum.fortinet.com/FindPost/184013/[/link]

Bob - self proclaimed posting junkie!
See my Fortigate related scripts at: http://fortigate.camerabob.com

multiple IPsec VPN on on one interface

Nominate a Forum Post for Knowledge Article Creation