Hi,
in the config router multicast-flow source address field is mandatory? I wish to create static IGMP groups only based on destination multicast addresses and not on source addresses.
Solved! Go to Solution.
Nominating a forum post submits a request to create a new Knowledge Article based on the forum post topic. Please ensure your nomination includes a solution within the reply.
Hello.
It is showing that it is mandatory in CLI. But if you will not set source-address, it will use 0.0.0.0 as any source IP address.
Hello.
It is showing that it is mandatory in CLI. But if you will not set source-address, it will use 0.0.0.0 as any source IP address.
It's really a good idea I could set the source addr 0.0.0.0 . Thanks!
Select Forum Responses to become Knowledge Articles!
Select the “Nominate to Knowledge Base” button to recommend a forum post to become a knowledge article.
User | Count |
---|---|
1631 | |
1063 | |
749 | |
443 | |
210 |
The Fortinet Security Fabric brings together the concepts of convergence and consolidation to provide comprehensive cybersecurity protection for all users, devices, and applications and across all network edges.
Copyright 2024 Fortinet, Inc. All Rights Reserved.