Support Forum
The Forums are a place to find answers on a range of Fortinet products from peers and product experts.
Kuno
New Contributor

monitoring power supply on Fortigate 600D

Hello, 

I'm wondering if there is a OID that I can poll on a Fortigate 600D that will tell me the status of the power supply. The monitoring system is configured to poll the status not to receive traps.

 

Cheers 

Kuno

3 REPLIES 3
Dave_Hall
Honored Contributor

Perhaps 1.3.6.1.4.1.12356.100.1.3.0.106.  Though not sure how useful it. 

 

 

NSE4/FMG-VM64/FortiAnalyzer-VM/6.0 (FWF30E/FW92D/FGT200D/FGT101E/FGT81E)/ FAP220B/221C

NSE4/FMG-VM64/FortiAnalyzer-VM/6.0 (FWF30E/FW92D/FGT200D/FGT101E/FGT81E)/ FAP220B/221C
Kuno
New Contributor

Thank you Dave for your quick answer.

Unfortunatly i don't see OID  1.3.6.1.4.1.12356.100.1.3 my output ends on  1.3.6.1.4.1.12356.100.1.2

I guess i need to check the MIB.

Thank you

haroon-s
New Contributor

Hi Kuno,

 

Try these SNMP OIDs:

Sensor Description: 1.3.6.1.4.1.12356.101.4.3.2.1.2
Sensor Value: 1.3.6.1.4.1.12356.101.4.3.2.1.3

 

What you want to do is perform an SNMP Table Walk on 1.3.6.1.4.1.12356.101.4.3.2.1 and that should show you the Table Index (Column 1), Description (Column2) and Values (column3). 

 

Pick your sensor and monitor it. Also, 600D and higher model like these have advanced PSU units which not only tell you the PSU status but can also tell you things like Status, Temperature, Fan Speeds etc. The Status value on 600E that we have is kind of weird. It shows 0 (FALSE) if there are no errors and shows 1 (TRUE) if there is an error. 

 

Also, you can search Fortigate OIDs on https://mibbrowser.online/mibdb_search.php?mib=FORTINET-FORTIGATE-MIB

 

Hope this helps.

 

Regards,

Haroon

 

 
 

 

 

Labels
Top Kudoed Authors