mirror traffic of ssid in tunnel mode

[Chris_k]

Hi folks.

I did not found an answer in the following request:

FortiGate ver. 7.6 with managed FortiSwitches & FortiAp's.

Created an SSID in tunnel mode, and i want to mirror this traffic to a port in the FortiSwitch for sniffing.

Any idea?

(creating software switch does not have the choice of selecting  the SSID interface).

Thanks 

[Anthony_E]

Hello Chris,

Thank you for using the Community Forum. I will seek to get you an answer or help. We will reply to this thread with an update as soon as possible.

Thanks,

[Anthony_E]

Hello Chris,

We are still looking for someone to help you.

We will come back to you ASAP.

Regards,

[ebilcari]

This article explains mirroring for a bridged SSID but as I checked is the same for a tunneled SSID. In order to add the tunnel SSID to a software switch, the SSID should not contain any IP configuration, details are shown here.

[Chris_k · Accepted solution]

Confirm that i can select the tunnel ssid as a member of a softswitch.

Pls give me some time to check if i can see the mirrored traffic.

Thanks a lot

[Chris_k]

Works !

but what if i have multiple  ssid's ?

how can i put them all in one softswitch ?

keep in mind that i have also fortiswitches