Support Forum
The Forums are a place to find answers on a range of Fortinet products from peers and product experts.
pkc
New Contributor

link aggregate on 1500D fortios 5.2.5 10 Gbps links vdom

Hi,

 

I'd like to set up an aggregated interface with two 10 Gbps links on a vdom  on a cluster of 1500D running fortiOS 5.2.5.

 

The cluster runs fine, but I can't set up the aggregation.

 

here is my interfaces config :

config system interface     edit "port34"         set vdom "prod"         set type physical         set snmp-index 34     next     edit "port38"         set vdom "prod"         set type physical         set snmp-index 38     next

 

   edit "agg1"

         set vdom "prod"

         set type aggregate

         set snmp-index 53

 

when I try to add the member, the device answers the following :

CLUSTER (agg1) # set member port34 entry not found in datasource value parse error before 'port34' Command fail. Return code -3

does anyone know how I can set up my aggregate link ?

 

best regards.

 

3 REPLIES 3
ede_pfau
SuperUser
SuperUser

Did just that last week, running v5.2.3. If you create the LACP port in the GUI, do you have port34 in the drop down list?

Is there any configuration on these ports, or are they used somewhere? Think DHCP server, VLANs...

Ede Kernel panic: Aiee, killing interrupt handler!
Ede Kernel panic: Aiee, killing interrupt handler!
pkc
New Contributor

Ports 34 and 38 are monitored in the HA.

So aggregate interface couldn't be set up.

thanks for pointing me to more search, could have double checked.

 

 

ede_pfau

So you fixed it by removing the port monitoring in the HA setup?

Instead, you could monitor the LACP port now.

Ede Kernel panic: Aiee, killing interrupt handler!
Ede Kernel panic: Aiee, killing interrupt handler!
Announcements

Select Forum Responses to become Knowledge Articles!

Select the “Nominate to Knowledge Base” button to recommend a forum post to become a knowledge article.

Labels
Top Kudoed Authors