ipsec site to site vpn

[sims]

Hi,

local subnet is 192.168.0.0/24

remote subnet is 192.168.1.0/24

vpn created using wizard , and it created addresses  automatically . address local and remote shows 0.0.0.0 

Is it normal ?

What does it mean 

Thanks

[Fullmoon]

0.0.0.0 it denotes Any, Global or All. Btw, you can specify specific network under Address section.

[emnoc]

Yes that 's normal what's the route table showing? It should show the remote-subnet in the route table 

e.g

   get ip routing info  all

And if this is a route-base vpn a route should exist to the designated network(s).

Ken