No socket found. DropWhat type of device and how many sessions do you normally have ? My 1st guess is ephermal port exhaustation but you can check this via the cli; diag sys session stat | grep ephemera Also look at your total session counts in the 1st line & pay attention to the lash counter. next question have you custom tuned or adjusted any TTL values for the firewall sessions?
PCNSE
NSE
StrongSwan
d=13 trace_id=200 msg=" iprope_in_check() check failed, drop"What do you have allow under that interface " internal" ; e.g show sys interface internal You need to probably allow CAPWAP if I had to guess. I would double check the interface and the set allowaccess command
PCNSE
NSE
StrongSwan
172.25.18.206:38212->255.255.255.255:38212That a local broadcast and properly with a TTL=1, so forwarding that would not help imho .
PCNSE
NSE
StrongSwan
FCNSA, FCNSP
---
FortiGate 200A/B, 224B, 110C, 100A/D, 80C/CM/Voice, 60B/C/CX/D, 50B, 40C, 30B
FortiAnalyzer 100B, 100C
FortiMail 100,100C
FortiManager VM
FortiAuthenticator VM
FortiToken
FortiAP 220B/221B, 11C
which will pass the IP to the controllerYou probably mean " ...of the controller" . Isn' t it that an IP address in a DHCP option on a Fortigate has to be entered in hex? I remember there were threads about the TFTP server option some time ago where this was mentioned.
FCNSA, FCNSP
---
FortiGate 200A/B, 224B, 110C, 100A/D, 80C/CM/Voice, 60B/C/CX/D, 50B, 40C, 30B
FortiAnalyzer 100B, 100C
FortiMail 100,100C
FortiManager VM
FortiAuthenticator VM
FortiToken
FortiAP 220B/221B, 11C
Select Forum Responses to become Knowledge Articles!
Select the “Nominate to Knowledge Base” button to recommend a forum post to become a knowledge article.
User | Count |
---|---|
1737 | |
1107 | |
752 | |
447 | |
240 |
The Fortinet Security Fabric brings together the concepts of convergence and consolidation to provide comprehensive cybersecurity protection for all users, devices, and applications and across all network edges.
Copyright 2024 Fortinet, Inc. All Rights Reserved.