- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
installing firmware from system reboot
Hi
i followed this docs https://docs.fortinet.com/document/fortigate/7.0.11/administration-guide/556915/installing-firmware-... to installing firmware from system reboot
but it doesn't show step 10. and show Fatal error: Loading FOS fails!
i'm sure the firmware was upload success from tftp server
and the firmware filename is FGT_100F-v7.0.11.M-build0489-FORTINET.out
also i tried this https://community.fortinet.com/t5/FortiGate/Technical-Tip-Installing-firmware-from-system-reboot/ta-... but it doesn't have "G" option
Please help me.
Solved! Go to Solution.
- Labels:
-
FortiGate
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hi,
Please try following the article https://community.fortinet.com/t5/FortiGate/Troubleshooting-Tip-Unable-to-boot-the-firewall-or-load-...
Hope that helps.
Best regards,
Jin
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hi,
Please try following the article https://community.fortinet.com/t5/FortiGate/Troubleshooting-Tip-Unable-to-boot-the-firewall-or-load-...
Hope that helps.
Best regards,
Jin
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Thank u!
It worked!
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hi, additionally, try to check MD5 hash of your image file to be sure that the firmware is not corrupted.W.
