how to see per IP based bandwidth

[engtt]

I am using foritnate 300c and here, dhcp is running. All of my users are getting IP automatically. I want to monitor IP address and per IP based bandwidth usage.

[Dave_Hall]

On the Dashboard enable both the Top Sessions and Per-IP Bandwidth Usage wigets. This will allow you to see at a glance which IP addresses are using up most of the bandwidth. From this you can check/drill down into sessions to see what kind of traffic is going on.

[emnoc]

Just keep in mind that the top session holder does not always equal the top bandwidth user. Another option would be to use a opensource flow analyzer like ntop or enable sflow.

[Silver]

Dear All,

Am facing the same issues i cannot see per ip bandwidth usage on the dashboard. 

Firmware version 5 patch 11

Any help plz