- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
got an error while configuring Vlan interface
hi all
while configuring a new vlan interface i got this error.
right-hand side of 'in' should be an object got undefined
devices behind this vlan couldn't get ip from FG dhcp.
i couldn't find anything online regarding this kind of error with fortigate.
did any one encounter with this kind of error?
im using FG100E (in my lab) ver 6.0.5.
pretty simple network with only one switch.
appreciate any inputs
thanks
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
hi
dose anyone encounter this error or know what is the cause of it?
thanks
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Welcome to the forums.
Some things to check for:
Did you try Wireshark to see if there are any errors?
Is the entire path between the end device and the FGT configured correctly (trunks defined and access ports all OK)?
Is the DHCP server properly configured on the correct VLAN?
If you give the device a static IP on that segment, do things route successfully? If so, the problem can be traced down to the DHCP side, not the network configuration.
Hope that helps.
Bob - self proclaimed posting junkie!
See my Fortigate related scripts at: http://fortigate.camerabob.com
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
but do you know the meaning of this error that im getting via UI?
"right-hand side of 'in' should be an object got undefined"
ive just attached a screenshot
thanks
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Have you tried with another browser ?
Or even try and configure via CLI ?