Dear all,
we manage the FortiClient via. FortiEMS, recently we no longer roll out the FortiClient V7.0.10 via. FortiEMS but via. Microsoft Intune.
The Roll-Out over Microsoft Intune works perfectly and connects to the EMS via. the Telemetry key. But if you then try to connect to the SSL VPN-Tunnel externally via. WiFI or hotspot, the FortiClient stuck at 98% and returns than to login screen.
If you then uninstall the FortiClient again and install it manually, it works. Is that really the solution?
I dont want to manually install over 200 devices later.
The problem only occurs since 7.0.10.
Does anyone have an idea what it could be?
Thanks for your help!
Nominating a forum post submits a request to create a new Knowledge Article based on the forum post topic. Please ensure your nomination includes a solution within the reply.
Hi @Rizgiff, This issue usually occurs due to IPv6 being enabled on the NIC of the client machine.
Please refer the following article: https://community.fortinet.com/t5/FortiGate/Technical-Tip-SSL-VPN-fails-at-98/ta-p/248363
You might need to disable the IPv6 on NIC if you're not using it.
Hi maulishshah,
do you really think the problem will be solved if I deactivate IPv6 on the NIC? Because strangely enough, if I uninstall the FortiClient and install it manually, it works again.
Select Forum Responses to become Knowledge Articles!
Select the “Nominate to Knowledge Base” button to recommend a forum post to become a knowledge article.
User | Count |
---|---|
1702 | |
1092 | |
752 | |
446 | |
228 |
The Fortinet Security Fabric brings together the concepts of convergence and consolidation to provide comprehensive cybersecurity protection for all users, devices, and applications and across all network edges.
Copyright 2024 Fortinet, Inc. All Rights Reserved.