hi.
it's like half an year that i have this problem. i'm trying with Fortinet support but there is no luck.
after 5-10 min using wifi. it's dead.
there is no ping to the firewall.
PING 192.168.100.254 (192.168.100.254): 56 data bytes Request timeout for icmp_seq 0 Request timeout for icmp_seq 1 Request timeout for icmp_seq 2 Request timeout for icmp_seq 3
i try a lot of things. but nothing helps.
i'm using the last version of FortiOs 5.4
Nominating a forum post submits a request to create a new Knowledge Article based on the forum post topic. Please ensure your nomination includes a solution within the reply.
pls help =[
Qs:
Was it everr working b4
can you downgrade back to a 5.2.x
What's the wireless cfg
is allowaccess ping enable on the FWF wireless interface
Does the wireless monitor show your associated to the FWF60D
did you execute any diag debug flow output
PCNSE
NSE
StrongSwan
Does this happen with multiple devices or just one?
MrSinners wrote:multiple devices. my imac , my iphone. my samsing galaxy. everythingDoes this happen with multiple devices or just one?
Have you tried a factory reset? Do you lost the pings over WIFI and LAN or only over WIFI?
If it's on both sites.
Whats happens when you disable Wifi? Do you have the same problem again?
james007 wrote:1. yes i try itHave you tried a factory reset? Do you lost the pings over WIFI and LAN or only over WIFI?
If it's on both sites.
Whats happens when you disable Wifi? Do you have the same problem again?
2. both. but the lan goes down after few hours. or few minutes.
3. when the network is down. i turn off the wifi and reconnect and it's works
Very strange behavior. I have never seen those before.
Have you take a look on crashlogs if some exists.
diag debug crashlog
If nothing is shown then none exists.
Can you tell us what you have already tried?
So we do not need to ask you things that you have already done before.
hi i try this command, no output.
because this FortiOs don't support logging to disk
i try put the wifi and internal lan in the same interface.(same class)
i disable all the features.
i did a lot.
if you need to see config. give me command and i will provide you
Select Forum Responses to become Knowledge Articles!
Select the “Nominate to Knowledge Base” button to recommend a forum post to become a knowledge article.
User | Count |
---|---|
1517 | |
1013 | |
749 | |
443 | |
209 |
The Fortinet Security Fabric brings together the concepts of convergence and consolidation to provide comprehensive cybersecurity protection for all users, devices, and applications and across all network edges.
Copyright 2024 Fortinet, Inc. All Rights Reserved.