fortiwifi 40F/ how to delete a port form the hardware switch LAN to set as a solo software switchLAN

[antoniocerasuolo]

Hi,

my lan hardware switch interface has 3 ports lan1,lan2,lan3.-> lan

these 3 ports are part of the main "internal lan"

how do i take lan1 out of the lan hardware switch and create a second hardware switch lets say lan_2 containing only the port lan1?

in this fashion i would then add lan_2 to a new internal interface lets say internal_2 ?

how can all of this be done? it seems impossible to find where to topke out lan1 from the hardware switch.

any help would be appreciated.

ciao,

Antonio

[antoniocerasuolo]

ok done , will now monitor the situation