fortiweb 1000e supported storage

[Forti_New]

hi guys.

I have a fortiWeb 1000E a FortiWeb 1000D with fortios 6.2.4. 

As the storage space in those units are reaching to full we want to replace storages with some that has more capacity. these devices already has 2x1TB non SSD hard disks. I want to extend the capacity and use 2x2TB in each device. but I'm not sure about the supported storage and hard disk models on these devices. 

which brands and maximum capacity are supported for these models?

and my second question is how to backup logs from fortiweb to a FTP server? what are the cli commands for it?

best regards.

[Stephen_G]

Hello Forti_New, 

Thank you for using the Community Forum. I will seek to get you an answer or help. We will reply to this thread with an update as soon as possible. 

Thanks, 

Stephen Gerner

Fortinet Community Team 

[Khidzir_MN]

Hello Forti_New,

Hope you're doing well.

For Q1.

The disk capacity is the hardware spec for the said model. It is not possible to change it.
We would suggest to use external logging device for the FortiWeb logs such as FortiAnalyzer.

https://docs.fortinet.com/document/fortiweb/7.0.4/administration-guide/303842/logging "Configuring logging"

For Q2.

Currently FortiWeb do not support sending logs to FTP server. You can configure FortiWeb to send log information to an FTP server in report form.

https://docs.fortinet.com/document/fortiweb/7.0.4/administration-guide/303842/logging "Configuring log destinations"

Thanks!

[Forti_New]

Thank you for your response.