fortifone dot1x issue

[ahmed_elmelegy]

hello all , i have this solution in my network (Juniper EX4100 switch connect to Fortifone and pc connected to fortifone) integrated with clearpass.

for PC mac authentication is successfully but for dot1x isnt authenticated , but when i remove the fortifone and connect it to the switch direct it authenticated successfully.

all of fortifones are managed by fortivoice.

this is my product in the network:

#FVE-VM-10
#FON-17
#FON-38
#FON-58

so is there any missing configuration on fortifone?

thanks

[Atul_S]

Hi Ahmed,

Gday. Pls review the doc and verify the 802.1x setting in your phone. Are there any logs you can share when the connection failed for the PC?

[ahmed_elmelegy]

i didnt know how to verify the 802.1x setting on fortifone from fortivoice.

but on the doc it support 802.1x.

how can i collect these logs?

[Atul_S]

Hi Ahmed,

Pls review the attached doc and look for 802.1x setting. The setting should be similar for your models.

Thanks

[ahmed_elmelegy]

but as i understand that when fortifone is managed by fortivoice , i cannot configure it except through fortivoice.

is this correct?

another thing ,how can i know that FortiFone pass 802.1x traffic?